TL3 End Terminal

The TL3 Terminal has been crash tested to meet the requirements of NCHRP Report 350 TL3. It can be used on all new installations or retrofitted to existing Flexfence installations. The TL3 Terminal uses standard Flexfence posts that are shortened in length providing a gradual tapering of the cables to an anchor bracket concreted into the ground.

The crash test assessment of the TL3 Terminal required end-on impacts, a re-directive impact and a reverse impact. All these impacts were successfully performed without releasing the cables from the anchor bracket.

The non-release of cables allows the downstream system to remain tensioned and functional in the event of secondary impacts. This is an important design consideration as nuisance impacts on wire rope systems can often go undetected. An anchor designed to release cables results in a loss of tension in the system. The system may subsequently fail to offer barrier redirection until repair at the anchor is performed.

Request More Information