Ingal Elevated Barrier
Ingal Elevated Barrier
The Ingal Elevated Barrier system, based on the Ezy-Guard High Containment MASH TL4 system, offers a MASH TL3 and AS5100 Compliant edge protection with deck or side mounting, minimal lane width impact.
Product Information
Product Information
Product Information Product Information
- Description DescriptionDescriptionThe Ingal Elevated Barrier system is based on the Ezy-Guard HC MASH TL3 system, combining AS5100.2 compliant edge protection with deck or side mounted posts and minimal lane intrusion. Using components from the proven Ezy-Guard HC system, it provides a versatile and robust barrier solution for locations where an in-ground post cannot be installed, from small culverts to bridges and larger structures.Features FeaturesFeatures• Crash tested and approved to MASH TL3• Complaint to AS5100.2 Low Performance Level• Accepted by the Austroads Safety Barrier Assessment Panel (ASBAP)• Designed in accordance with AS/NZS 3845.1:2015 or AS/NZS 3845.2:2017 Road Safety Barrier Systems & Devices• Energy-absorbing Z-Posts yield above the base plate• Deck or Side mounting options• Standard HC posts for quick repair• Minimal load transfer to structures• System width of 180 mm for reduced lane intrusion• Easily transitions into standard roadside guardrail systems for a smooth and compliant connection back to inground or base plated systems
- System Specifications System SpecificationsSystem Specifications• Thrie-Beam Length:• HC Z-Post Mass:• Corrosive Protection:• Rail Height Above Ground:• Z-Post Height Above Ground:• Post Spacing:• System Width:• Minimum Concrete Strength• MASH TL3 Crash Test Deflection:4,000mm19.5kgHot Dip Galvanized (HDG) to AS 4680980mm970mm2m180mm30MPa1.70mApproved Variants Approved VariantsApproved Variants• Deck mounted to retrofit new or existing structures• Side mounted to maximizes lane widthTransitions TransitionsAttachments AttachmentsAttachments• Post Caps for additional safety in pedestrian and cyclist areas
| Title | Type | Size | |
| Malaysia Product Catalogue v.0824 | 9827 KB | Download |
Got Questions?
Frequently asked questions
- Can the system be retrofitted to existing structures?View
Yes. It can be bolted to existing decks or fascia beams. For retrofit work, anchor suitability must be confirmed by the project engineer.
For more information, contact your local Ingal representative.
- Can the Ingal Elevated Barrier be deck mounted or side mounted?View
Yes. The system can be installed as a deck mount or a side mount using chemically anchored M20 studs. Both options provide AS5100 compliant edge protection.
- What containment levels does the system provide?View
- How is the system anchored to the bridge?View
- What posts are used in the on-structure section?View
- How does it transition to roadside barrier?View
- What is the minimum concrete strength required for installation?View
